Kentrox AI232 - Manual (Page 32)

AI232 Version 9.6x User’s Guide
Using the AI198 Menu System: Navigating the Menu System
2-4
Some submenus require a selection from a list and then re-display the previous menu
showing the selection. Other submenus have their own submenus that request
additional information. After saving the entries, the top-level menu re-appears.
Toggles
Toggles display two or more values that can be selected for a parameter. Toggles
have an asterisk (
* ) next to their menu item number. Entering the menu item number
toggles to the next selection.
In this example, menu items 06 and 07 are toggles.
For 06*TCP Default Window Size , the user can toggle between values 200 , 512 , 1024 , and
2048 . For 07*TCP Send Ahead , the user can toggle between ON and OFF .
Data
Data menu items request text entries (such as destination names and card
descriptions) or numeric values (such as port numbers and IP addresses). To enter
information in a data menu item, enter the menu item number followed by a comma
(or a space) and the configuration information.
In this example, the menu item requires an IP address entry.
To enter an IP address of 172.016.002.043, enter the following:
1,172.016.002.043
The menu re-appears with the entered IP address.
To change configuration data that has been entered for a menu item, enter the menu
item number followed by a comma and the new data.
Tip: To change a typed entry, use BACKSPACE to back up to the desired position in
the text and retype the changes. However, once the user presses ENTER,
changes can be made only by selecting that menu item and re-entering the
data.
02+Configure as AI232 network interface card
06*TCP Default Window Size (200, 512, 1024, 2048)-------------------------- 200
07*TCP Send Ahead-----------------------------------------------------------OFF
01 IP Address (0.0.0.0 - 255.255.255.254)-----------------------000.000.000.000
01 IP Address (0.0.0.0 - 255.255.255.254)-----------------------172.016.002.043