Kentrox AI232 - Manual (Page 291)

AI232 Version 9.6x User’s Guide
AI232 Commands: useradd
8-119
useradd
Description
This command adds a username and password. When the user first logs into AI232,
the login name and password are both
ai by default. Five grace logins are available
before a username and password must be configured. A total of ten users can be
added to the database.
Command Type
shell
Formats
useradd [ -profile_name ] [ username ]
Parameters
profile_name Assigns a permission to a username. Table 8-3 describes the
permissions. The default permission is supervisor .
username Defines the login name for a user (up to 8 characters). After
entering a
username , a prompt appears that asks for a password
(up to 10 characters).
Table 8-3 Description of Permissions
profile_name Permission
supervisor Specifies a user who can execute all commands on the system. At
least one supervisor permission must be configured. The system
will not allow the deletion of the only supervisor user. The default
permission is
supervisor .
mgmt Specifies a user who can execute all commands except for
useradd .