Kentrox AI232 - Manual (Page 257)

AI232 Version 9.6x User’s Guide
AI232 Commands: selcnf
8-85
selcnf

Note: This command is only available for AI232 in standalone mode.
Description
This command has two forms: One allows for the recovery of an overwritten runtime
configuration file and the other allows for the deletion of the specified configuration
file. Any configuration file (with a .cnf extension) can be used for system boot up. The
configuration file is written to boot.ini.
Command Type
shell
Formats
selcnf -r
selcnf -d config_file
Parameters
Examples
This example displays the available options for command selcnf .
-r Specifies the option that recovers the current overwritten run-time
configuration file.
-d Specifies the option that deletes a configuration file.
config_file Defines a configuration file for deletion; it must end with a .cnf
extension.
[232]selcnf
usage: selcnf -r
selcnf [-d] <config_file>
Selects the specified config file for current configuration.
Options:
-r Recovers the current over-written run-time config file
-d Deletes the specified configuration file
[232]