Kentrox AI232 User Manual
Page 211
AI232 Version 9.6x User’s Guide
AI232 Commands: diag-eth
8-39
Examples
This example displays the configuration of diagnostic interpretation level
medium
for the
Ethernet diagnostic session display.
This example displays the enabling and disabling of the timestamp display.
This example displays the enabling and disabling of promiscuous mode.
*#
port_number
Defines the TCP/UDP port number regardless of the
MAC/IP address settings.
protocol
Adds or deletes a specific protocol filter. Available
protocol filters are:
z
ip
z
tcp
z
udp
z
icmp
z
arp
z
osi.
all
Deletes all the filters or adds a filter to show all
Ethernet traffic.
list
Lists all the filters in the system.
[232]diag-eth
interpret medium
Interpretation is now set to MEDIUM.
[232]diag-eth
timestamp
Timestamps will now be displayed.
timestamp
Timestamps will no longer be displayed.
[232]diag-eth
promiscuous
The ethernet chip is now in promiscuous mode.
promiscuous
The ethernet chip is now in normal mode.