Lexicon Digital Controller MC-12 - Manual (Page 165)

MC-12 Mode Adjust
5-39
EARLY RFLX LVL -80dB to +12dB, OFF
Controls the amount of additional early reflections. Available in all
LIVE! modes.
EFFECT LVL -12 to +6dB
Adjusts the amount of effect applied to the listening mode. Available
in NIGHTCLUB, CONCERT HALL, CHURCH, CATHEDRAL, PANORAMA,
MONO LOGIC, and 5.1 MONO LOGIC modes.
ES DECODING AUTO, ON, OFF
Controls DTS-ES decoding, which extracts a rear channel from
5.1-channel DTS, 5.1-channel matrix-encoded DTS-ES, and
6.1-channel discrete-encoded DTS-ES sources. When ON is selected,
DTS-ES decoding is activated for all DTS-ES sources. When OFF is
selected, DTS-ES decoding is deactivated for all DTS-ES sources.
When AUTO is selected, DTS-ES decoding is activated when a
5.1-channel matrix-encoded or a 6.1-channel discrete-encoded
DTS-ES source is detected. DTS-ES decoding is deactivated when a
5.1-channel DTS source is detected.
DTS-ES listening modes are available when DTS-ES decoding is
engaged. DTS listening modes are available when DTS-ES decoding is
not engaged. Refer to the DTS-ES Decoding section that begins on
page 5-22 for more information.
Note the following:
• DTS-ES decoding cannot be engaged unless both side and rear
speakers are present.
• When the Shift command bank is activated, pressing the
remote control DTS button while a DTS-ES source is present
adjusts the ES DECODING parameter, cycling through the
AUTO, ON, and OFF settings.
• The DTS-ES STATUS menu includes an SB level meter when the
ES DECODING parameter is set to ON and a 5.1-channel DTS
source is present or when the ES DECODING parameter is set
to AUTO and a 5.1-channel matrix-encoded or 6.1-channel
discrete-encoded DTS-ES source is present.
This parameter is available in all DTS modes.
EX DECODING AUTO, ON, OFF
Controls Dolby Digital Surround EX decoding, which extracts a rear
channel from 5.1-channel Dolby Digital sources recorded with or
without Dolby Digital Surround EX. When ON, Dolby Digital
Surround EX decoding is engaged for all 5.1-channel Dolby Digital
sources. When OFF, Dolby Digital Surround EX decoding is disen-
gaged for all 5.1-channel Dolby Digital sources.
When AUTO is selected, Dolby Digital Surround EX decoding is
engaged when a flagged 5.1-channel Dolby Digital source recorded
with Dolby Digital Surround EX encoding is detected. Dolby Digital
Surround EX decoding is not engaged when a non- flagged
5.1-channel Dolby Digital source recorded with or without Dolby
Digital Surround EX encoding is detected.
Note:
The MC-12 cannot automatically detect Dolby Digital Surround EX
encoding in non-flagged 5.1-channel Dolby Digital sources. A non-flagged
input source does not identify Dolby Digital Surround EX encoding in the
input signal.
The Dolby DIGITAL EX listening mode is available when Dolby
Digital Surround EX decoding is engaged. The Dolby DIGITAL
listening mode is available when Dolby Digital Surround EX
decoding is not engaged. Refer to the Dolby DIGITAL EX & Dolby
DIGITAL listening mode descriptions that begin on page 5-19 for
more information.