Lexicon Digital Controller MC-12 - Manual (Page 96)

Setup Lexicon
3-52
MANUAL CALIBRATION
Selecting the SPEAKER SETUP menu MANUAL option displays the MANUAL SPEAKER SETUP menu, to manually calibrate speaker distances and
output levels. The table below indicates available manual calibration options.
Manual Options DetailsB
SPEAKER DISTANCES Provides manual calibration and individual adjustment of speaker distances.
LEVELS CALIBRATION Provides manual calibration and individual adjustment of output levels.
INTERNAL NOISE TEST
Automatically sends an internal calibration noise signal to each Main Zone audio output connector, allowing
for simultaneous output level adjustment.
EXTERNAL NOISE TEST
• Requires an external calibration source such as an audio calibration disc.
• Activates an appropriate listening mode based on the current Main Zone input source.
BASS PEAK LIMITERS
• Provides amplitude limits for low frequency signals sent to the Main Zone audio output connectors labeled
Subwoofer L/R and LFE, and low frequency signals redirected to other Main Zone audio output connectors.
• Protects speakers against input sources that produce low frequency signal peaks.
SPEAKERS SETUP MANUAL
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
CUSTOM SETUP
40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
MANUAL SPEAKER SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
C
R SR RR
L SL RL M
SUB
0.0dB 0.0dB 0.0dB
0.0dB
0.0dB 0.0dB 0.0dB 0.0dB
SET CROSSOVERS
BEFORE CALIBRATING
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION