Lexicon Digital Controller MC-12 - Manual (Page 181)

MC-12 Appendix
A-3
Specifications are subject to change without notice.
Microphone Input Connectors
Inputs • 4 3.5 miniature phone jacks
Input Sensitivity • 10mVrms (400mV maximum input level)
Input Impedence • 20kΩ (accepts balanced or unbalanced input signals)
Other
Trigger Outputs • 1 power on/off and 1 programmable connector on
detachable screw terminals (+12 VDC, 0.5 amps each)
RS-232 Serial Input/
Output • 2 9-pin D-sub connectors
Power Requirements • 90-250 VAC, 50-60Hz, 60W (universal line input), detach-
able power cord
MC-12
Dimensions &
Weight • Height (with feet): 5.2 inches (132mm)
• Width: 17.3 inches (440mm)
• Depth: 14.85 inches (377mm)
• Weight: 36lbs (16.4kg)
MC-12 Balanced
Dimensions &
Weight • Height (with feet): 6.63 inches (169mm)
• Width: 17.3 inches (440mm)
• Depth: 14.85 inches (377mm)
• Weight: 45lbs (20.5kg)
Rack Mounting • Optional brackets are available for installation in a stan-
dard 19" equipment rack (2 rack units required for MC-
12; 3 rack units required for MC-12 Balanced.)
Environment • Operating Temperature: 0° to 35°C (32° to 95°F)
• Storage Temperature: -30° to 75°C (-22° to 167°F)
• Relative Humidity: 95% maximum without condensation
Remote Control • Hand-held, backlit infrared remote control unit
• Requires 2 AA batteries (Alkaline batteries recommended)
Video Input & Output Connectors
Video Inputs • 5 composite (RCA), 8 S-video, and 4 component video (3
RCA and 1 BNC))
Video Outputs • 4 composite (RCA, 2 monitor and 2 Record Zone), 2 S-
video (2 monitor and 2 Record Zone), and 1 component
(BNC)
Composite & S-video Performance
Compatibility • NTSC, PAL, and SECAM
Switching • Active
Output Level • 1.0V peak-to-peak
Impedance • 75Ω
Input Return Loss • >40dB
Differential Gain • <0.5%
Differential Phase • <0.5°
Bandwidth • >25MHz
K Factor • <0.3%
Gain • ±0.15dB
Signal-to-Noise Ratio • >70dB
Frequency Response • 10Hz to 10MHz + 0.1/-0.3dB
Component Video Performance
Compatibility • 3-channel (Y, Pr, Pb), format-independent
Switching • Passive
Impedence • 75Ω
Insertion Loss • <3dB
Bandwidth • >300MHz