Lexicon Digital Controller MC-12 - Manual (Page 190)

Appendix Lexicon
A-12
MENU TREE (continued)
AUTO SPEAKER SETUP
AUTO LEVELS
FRONT LEFT
CENTER
FRONT RIGHT
SIDE RIGHT
REAR RIGHT
REAR LEFT
SIDE LEFT
SUB (MONO)
SUB RIGHT
LFE ERROR
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
N/A
N/A
AUTO DISTANCES
FOR AUTO CALIBRATION
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
SET CROSSOVERS
BEFORE CALIBRATING
MIC CHECK REQUIRED
DISTANCES & LEVELS
DISTANCES
OUTPUT LEVELS
PLACE MICROPHONES
IN PRIMARY LISTENING
POSITIONS
CUSTOM SETUP
40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
AUTO SPEAKER SETUP
!CAUTION!
HIGH AUDIO LEVELS
YOU WILL HAVE 10 SEC
TO LEAVE THE ROOM OR
SIT QUIETLY
PRESS TO BEGIN
COUNTDOWN
AUTO SPEAKER SETUP
TEST WILL BEGIN IN
10
PRESS TO SKIP
COUNTDOWN
CUSTOM SETUP SETTING DISTANCES
FRONT LEFT
CENTER
FRONT RIGHT
SIDE RIGHT
REAR RIGHT
REAR LEFT
SIDE LEFT
SUB (MONO)
SUB RIGHT
LFE 0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
N/A
N/A
CUSTOM SETUP SETTING LEVELS
FRONT LEFT
CENTER
FRONT RIGHT
SIDE RIGHT
REAR RIGHT
REAR LEFT
SIDE LEFT
SUB (MONO)
SUB RIGHT
LFE +0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
N/A
N/A
SPKR OUTPUT TOO HIGH
(SPEAKER)
SPKR OUTPUT TOO LOW
(SPEAKER)
SPEAKER IS NOT ENABLED
(SPEAKER)
FRONT LEFT
CENTER
FRONT RIGHT
SIDE RIGHT
REAR RIGHT
REAR LEFT
SIDE LEFT
SUB (MONO)
SUB RIGHT
LFE ERROR
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
N/A
N/A
APPLIED
AUTO LEVELS
SPEAKER OUT OF PHASE
(SPEAKER)
SIGNAL TOO LOW
(SPEAKER)
MAY NOT BE ACCURATE
(SPEAKER)
UNABLE TO CALCULATE
(SPEAKER)
OK
(SPEAKER)
The AUTO DISTANCES screen shown below indicates
the individual calibration results for each speaker. Press
the
and arrow buttons to highlight the desired
speaker calibration parameter. Then, press the
arrow button to view more detailed results for the
selected speaker.
The AUTO LEVELS screen shown below indicates the
individual calibration results for each speaker. Press the
and arrow buttons to highlight the desired
speaker calibration parameter. Then, press the
arrow button to view more detailed results for the
selected speaker.
SPEAKER IS NOT ENABLED
(SPEAKER)
OK
(SPEAKER)
SET DISTANCES
AUTO DISTANCES
ORIGINAL DISTANCES
C
R SR RR
L SL RL M
SUB
0.0ft 0.0ft 0.0ft
0.0ft
0.0ft 0.0ft 0.0ft 0.0ft
SET LEVELS
AUTO LEVELS
ORIGINAL LEVELS
C
R SR RR
L SL RL M
SUB
0.0dB 0.0dB 0.0dB
0.0dB
0.0dB 0.0dB 0.0dB 0.0dB
APPLIED
ORIGINAL LEVELS APPLIED
AUTO DISTANCES
APPLIED
ORIGINAL DISTANCES
LIVE! CALIBRATION