Lexicon Digital Controller MC-12 - Manual (Page 29)

MC-12 Basic Operation
2-11
MAIN MENU
The MAIN MENU represents the beginning of
the menu structure. Use the MAIN MENU to
open the three main menu branches: MODE
ADJUST, AUDIO CONTROLS, and SETUP.
MENU NAVIGATION
Use the remote control Menu and arrow buttons to navigate the
extensive menu structure shown in the Appendix. The table below
indicates the navigation commands remote control buttons
perform when the Main Zone command bank is activated.
MENU ITEM SELECTION
Use the remote control Menu arrows to select menu items.
To select a menu item:
1. Press the remote control or arrow buttons to highlight the
desired menu item.
2. When the desired menu item is highlighted, press the arrow
button to select the highlighted item. If you select an option,
another menu displays. If you select a parameter, a parameter
menu or horizontal graph opens.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
Button Navigation Function(s)
• When no menus are displayed, press the MENU button to open the MAIN MENU.
• When a menu is open, press the MENU button to close the menu structure.
• When no menus are displayed, press the arrow button to open the MAIN MENU.
• When a menu is open, press the arrow button to select the highlighted menu item.
• When a menu is open, press the arrow button to close the menu and, in most cases, open the previous menu. Sub-
sequent presses continue to close the current menu and open the previous menu until the MAIN MENU is closed.
When the MAIN MENU is closed, the menu structure is also closed.
• When no menus are displayed, pressing the arrow button performs no function.
• When a drop-down menu is open, press the arrow button to select the current setting and close the drop-down
menu.
When a menu is open, press the or arrow buttons to scroll upward or downward through the complete list of menu
items. All menu items are displayed on-screen. A scroll bar appears on the right side of the menu when menu items exceed
the top and bottom margins of the display, and the cursor automatically advances to the next menu item when the first or
last menu item is passed. The highlighted menu item is displayed on the MC-12 front-panel.