Lexicon Digital Controller MC-12 - Manual (Page 69)

MC-12 Setup
3-25
THX SPEAKER SETUPS
Selecting CROSSOVER SETUP THX SETUP opens the THX SPEAKER
SETUP screen, which indicates that pressing the arrow button will
automatically configure the Main Zone audio output connectors for
a THX speaker setup. You should use THX-certified speakers in a
THX speaker setup.
When the THX SPEAKER SETUP screen opens:
• Press the arrow button to configure the Main Zone audio
output connectors for a THX speaker setup. The THX SETUP
menu will open on the on-screen display.
• Press the arrow button to close the message without config-
uring the Main Zone audio output connectors for a THX
speaker setup.
When a THX speaker setup is selected, the MC-12 applies a THX
80Hz crossover point with a 12dB-per-octave filter to the Front L/R,
Center, Side L/R, and Rear L/R output connectors. The MC-12
applies a THX 80Hz crossover point with a 24dB-per-octave filter to
the Subwoofer L/R output connectors.
Notes:
• A THX speaker setup is not required to activate THX listening
modes.
• In the THX SETUP menu, only the REAR L/R, THX ULTRA2 SUB,
BGC, and ASA parameters can be changed.
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
THX SPEAKER SETUP THX SETUP
FRONT L/R
CENTER
SIDE L/R
REAR L/R
SUB XOVER
THX 80Hz
THX 80Hz
THX 80Hz
THX 80Hz
THX 80Hz
OFF
OFF
SUB L/R
N/A
LFE
ULTRA2 SUB
BGC
ASA
MONO
APART
CUSTOM SETUP
40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
CROSSOVER SETUP
CUSTOM SETUP
THX SETUP
C
R SR RR
L SL RL M
SUB
80Hz 80Hz 80Hz
80Hz
80Hz 80Hz 80Hz 80Hz
CUSTOM SETUP
40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
CROSSOVER SETUP
CUSTOM SETUP
THX SETUP
C
R SR RR
L SL RL M
SUB
80Hz 80Hz 80Hz
80Hz
80Hz 80Hz 80Hz 80Hz
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION !CAUTION!
PRESSING THE
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A THX
SPEAKER
CONFIGURATION
SPEAKERS SETUP SET CROSSOVERS THX SETUP