Lexicon Digital Controller MC-12 - Manual (Page 27)

MC-12 Basic Operation
2-9
7 RECORD ZONE AUDIO OUTPUT CONNECTORS
Provide analog and digital audio output in the Record Zone. Two
stereo connectors labeled Audio L/R are available for analog audio
output. The connector labeled Fix passes audio at fixed output
levels. The connector labeled Var passes audio at variable output
levels and includes a built-in volume control. Two S/PDIF
connectors (one coaxial and one optical) are available for digital
audio output.
Alternatively, these connectors can be used to connect a recording
device. When the Record Zone audio output connector labeled Var
is sent to a recording device, you should set the VOLUME
CONTROL SETUP menu REC PWR ON parameter to +0dB to
achieve appropriate recording levels. The Record Zone audio
output connector labeled Var passes audio at variable output levels.
Adjusting Record Zone volume level will affect the recording.
8 BALANCED AUDIO OUTPUT CONNECTORS
(MC-12 BALANCED)
Provide balanced analog audio output in the Main Zone and Zone
2. Ten connectors labeled Front L/R, Center, LFE, Subwoofer L/R,
Side L/R, and Rear L/R are available in the Main Zone. The
connectors labeled Aux L/R are provided for future expansion. Two
connectors labeled Zone 2 L/R are available in Zone 2.
9 VIDEO INPUT CONNECTORS
Provide video input in the Main and Record Zones. Five composite
video connectors labeled Video 1 to 5, eight S-video connectors
labeled S-Video 1 to 8, and four component video connectors
(three RCA and one BNC) labeled INPUT 1 to 4 are available. The
component video connectors are not available for the Record Zone.
10 MAIN VIDEO OUTPUT CONNECTORS
Provide video output in the Main Zone. Two composite video
connectors, two S-video connectors, and one component video
connector (BNC) are available. The composite and S-video
connectors labeled 1 (OSD) incorporate the on-screen display.
Note:
• Composite video output connectors are available when a composite or S-
video source is present.
• S-video output connectors are available when an S-video source is
present.
• Component video output connectors are available when a component
video source is present.
11 RECORD ZONE VIDEO OUTPUT CONNECTORS
Provide video output in the Record Zone. Two composite video
connectors and two S-video connectors are available. Alternatively,
these connectors can be used to connect a video recording device.
12 RS-232 CONNECTORS
The RS-232 serial connector (1) is used to perform backup and
restoration of configuration files and flash memory software
upgrades. The RS-232 connector (2) is capable of supporting
future developments.