Lexicon Digital Controller MC-12 - Manual (Page 62)

Setup Lexicon
3-18
CONFIGURING ADVANCED ZONE SETTINGS (continued)
S-VIDEO OSD 4:3 ON, OFF
Controls the on-screen display aspect ratio when the display device
is connected to a Main Zone S-Video output connector. Aspect ratio
refers to the size of the picture or the display device screen. A 4:3
aspect ratio is almost square. A 16:9 aspect ratio, often referred to
as widescreen, is almost twice as wide as it is high.
When ON, the on-screen display appears in a 4:3 aspect ratio
regardless of the incoming video input signal. When OFF, the on-
screen display appears in the same aspect ratio as the incoming
video input signal.
The on-screen display appears horizontally stretched across the
display device screen when all of the following conditions are
present:
• The S-VIDEO OSD (4:3) parameter is OFF.
• An anamorphic video input signal is present.
• A 16:9 display device (widescreen) is connected to an S-video
output connector.
COMPONENT OSD ON, OFF
Controls the appearance of the on-screen display when the display
device is connected to the component video output connector.
When ON, the display device shows the on-screen display as a 480i
video signal on a full blue screen background. To minimize viewing
distractions, the two-line status does not appear in the on-screen
display. When OFF, the display device does not show the on-screen
display, including the two-line status.
Note:
When the ON-SCREEN DISPLAY menu BACKGROUND parameter is
OFF, the display device using the component video output connector
will not show the on-screen display.
ZONE2 IN & RECORD IN DIGITAL, ANLG, DMIX
Controls the interaction of the digital and analog audio input
connectors assigned to the current Zone 2 and Record Zone inputs.
The table of the next page describes ZONE2 and RECORD IN
parameter settings.
CAUTION!
When the ZONE2 or RECORD IN parameter is set to
DIGITAL or ANLG, the MC-12 recognizes some DTS-
encoded sources as audio signals (not data signals) and
outputs loud digital noise from the Zone 2 or Record Zone
audio output connectors.
INPUTS SETUP DVD1 MAIN ADVANCED S-VIDEO OSD 4:3 INPUTS SETUP DVD1 MAIN ADVANCED COMPONENT OSD
INPUTS SETUP DVD1 ZONE2 IN RECORD IN OR