Lexicon Digital Controller MC-12 - Manual (Page 65)

MC-12 Setup
3-21
DIG OUT RATE INPUT, 44.1kHz, 48kHz, 88.2kHz, 96kHz
Controls the sample rate of digital and analog input signals sent to
the Record Zone digital audio output connectors. When INPUT is
selected, the sample rate of input signals is not converted.
Therefore, the original sample rate is maintained from the input
connectors through to the Record Zone digital audio output
connectors.
When a value is selected, input signals pass through the selected
value of sample rate conversion, then pass to the Record Zone
digital audio output connectors. Set the DIG OUT RATE parameter
to the appropriate value when using a recording format that
operates on a single sample rate, such as CD-R format (44.1kHz).
RECORD BLOCKED, ENABLED
Prevents recording device feedback loops. When BLOCKED is
selected, the MC-12 blocks the Record Zone audio output
connectors to prevent feedback loops. However, video input signals
are still passed to the Record Zone video output connectors. When
ENABLED is selected, audio and video input signals are passed to
the Record Zone audio and video output connectors.
INPUTS SETUP DVD1 RECORD ADVANCED DIG OUT RATE INPUTS SETUP DVD1 RECORD ADVANCED RECORD