Lexicon Digital Controller MC-12 - Manual (Page 17)

MC-12 Getting Started
1-5
PRODUCT REGISTRATION
Please register the MC-12 Digital Controller within 15 days of
purchase. Register online at www.lexicon.com or complete and
return the product registration card attached to the back cover of
this user guide. Retain the sales receipt as proof of warranty
coverage.
INSTALLATION CONSIDERATIONS
The MC-12 requires special care during installation to ensure
optimal performance. Pay particular attention to instructions below
and to other precautions that appear throughout this user guide.
D O install the MC-12 on a solid, flat, level surface such as a table or
shelf. The MC-12 can also be installed in a standard 19-inch
equipment rack using an optional rack-mount kit available from an
authorized Lexicon dealer.
D O select a dry, well-ventilated location out of direct sunlight.
D O N OT expose the MC-12 to high temperatures, humidity,
steam, smoke, dampness or excessive dust. Avoid installing the
MC-12 near radiators and other heat-producing appliances.
D O N OT install the MC-12 near unshielded TV or FM antennas,
cable TV decoders, or other RF-emitting devices that might cause
interference.
D O N OT place the MC-12 on a thick rug or carpet, or cover the
MC-12 with a cloth, as this might prevent proper cooling.
D O N OT place the MC-12 on a windowsill or any location exposed
to direct sunlight.
D O N OT obstruct the front-panel IR receiver window. The remote
control must be in line of sight with the IR receiver for proper
operation.
D O N OT install the MC-12 on a surface that is unstable or unable
to support all four feet, unless it is installed in an equipment rack.
D O N OT stack the MC-12 directly above heat-producing
equipment such as a power amplifier.
CAUTION!
Before moving the MC-12, power the unit off using the
rear-panel power switch and unplug the power cord from
the wall outlet.