Lucent Technologies INTUITY Messaging Solutions Enhanced-List Application 585-310-575 - Manual (Page 20)

Installation
10 Issue 1 July 1997
Figure 2-1. Software Install Menu
3. Insert the tape labeled Enhanced-List Application into the tape drive.
4. Select:
The system displays the message:
Insert a tape into the Tape Drive.
Type [go] when ready
or [q] to quit: (default: go)
5. Press to go ahead with the install.
The system displays the message:
Installation in progress. Do not remove the tape.
The following packages are available:
1 ELA Enhanced List Application Package
Select package(s) you wish to process (or ‘all’ to
process all packages). (default: all) [?, ??, q].
NOTE:
If you receive a device open failure message, the tape was
inserted after you selected Tape Drive or the system did not see
the tape. In that case, complete step a through step d below.
a. Enter q
The system displays the Software Install menu (Figure 2-1).
b. Remove the tape from the tape drive.
c. Re-insert the tape into the tape drive.
d. Repeat step 4 and step 5.
> Tape drive
ENTER