Lucent Technologies INTUITY Messaging Solutions Enhanced-List Application 585-310-575 - Manual (Page 59)

Testing I NTUITY Enhanced Lists
Issue 1 July 1997 49
■ "Defining an ELA Class of Service" on page 3-16
■ "Setting Up ELA and Shadow Mailbox Community IDs" on
page 3-19
■ "Administering TCP/IP" on page 3-23
■ "Setting Up IMAPI Sessions for Trusted Server Access" on
page 3-26
■ "Defining Two ELA Trusted Servers" on page 3-28 (You must have
two available, unused extensions, one for the shadow mailbox and
one for the enhanced-list mailbox)
2. Using the procedures in the Installation manual specific to your platform,
set up two test users and test telephones.
3. Using the procedures in the Installation manual specific to your platform,
use the test-1 telephone to create and send a voice mail message to the
ELA mailbox. Record the following or a similar test message and then
enter the address for the enhanced-list mailbox:
“This is a test ELA message for I NTUITY AUDIX.”
4. Hang up the test-1 telephone to disconnect.
5. Verify that the MWIs for the test users’ telephones activate and that the test
users received the message. (See the Installation manual specific to your
platform.)
6. Delete the test messages. (See the Installation manual specific to your
platform.)
7. Delete the test users. (See the Installation manual specific to your
platform.)