Lucent Technologies INTUITY Messaging Solutions Enhanced-List Application 585-310-575 - Manual (Page 21)

Rebooting the System
Issue 1 July 1997 11
6. Press to select all .
The system installs the software and displays several status messages.
When the software installation is complete, the system displays the
message:
Installation of Enhanced List Application Package
was successful.
Insert a tape into the Tape Drive.
Type [go] when ready
or [q] to quit: (default: go)
7. Remove the tape from the tape drive and re-insert the back-up tape.
8. Enter q
9. Press (F6) repeatedly to return to the main menu.
10. Continue with the next procedure, ‘‘Rebooting the System’’.
Rebooting the System
Rebooting is a 2-step process. First the voice system must be stopped, and then
the machine can be rebooted. To stop the voice system:
1. Starting from the main menu, select:
The system displays the Wait Time window (Figure 2-2).
Figure 2-2. Wait Time Window
2. Enter 60 in the Seconds: field to have the system wait one minute for
calls in progress to finish before stopping the voice system.
ENTER
CANCEL
>Stop Voice System
> System Control
> System Management
> Customer/Services Administration