Lucent Technologies INTUITY Messaging Solutions Enhanced-List Application 585-310-575 - Manual (Page 26)

Administering AUDIX for ELA
16 Issue 1 July 1997
6. Press (F3) to save the information in the system database.
The cursor returns to the command line, and the system displays the
message
Command Successfully Completed .
7. Continue with the next procedure or enter exit to leave AUDIX
Administration.
Defining an ELA Class of Service
The following task contains instructions for the fields that directly relate to ELA.
The other fields should be administered to support all capabilities that you
anticipate using, that is, maximum call answer length, announcement set, etc.
See your
I NTUITY Messaging Solutions Release 4 Administration book for
explanations of the other fields on these screens, and their implications.
NOTE:
ELA can take up to 12 hours to show the changes you make to subscriber
information in I
NTUITY AUDIX.
Before you begin the following procedure, ensure that you have an unused Class
of Service that you can define for ELA. We recommend that you use a COS that is
between 2 and 11. (Customers often use COS 1 as their default Class of Service).
To administer a COS for ELA:
1. Starting from the main menu (Figure 3-1 on page 3-14), select:
2. At the enter command: prompt, enter either:
where COS_number is the unique Class of Service you would like to use
for ELA. For example, enter ch cos 10.
The system displays the Class of Service screen (Figure 3-2).
Full Command Version Short Command Version
change cos COS_number ch cos COS_number
ENTER
> AUDIX Administration