Lucent Technologies INTUITY Messaging Solutions Enhanced-List Application 585-310-575 - Manual (Page 45)

Defining the AUDIX server and Administering Access
Issue 1 July 1997 35
Table 4-1. Field Definitions: Set Up Enhanced-List System Data Window
Field Name Description/Procedure
System Login:
Valid Input:
sa, vm
Enter sa (system administrator login) or vm (voice mail
administrator login).
NOTE:
Administrators using the vm login cannot administer
enhanced lists or ELA trusted servers. This field allows
ELA to log into AUDIX
.
System Password:
Valid Input:
6- to 8-alphanumeric
characters
Enter your sa or vm administration password.
The ELA server uses this password to perform AUDIX
administration functions, such as adding or deleting an
enhanced-list mailbox.
IMAPI Password:
Valid Input:
0- to 8-alphanumeric
characters
If you decided to require that trusted servers use an IMAPI
password, enter the IMAPI password you administered in
AUDIX.
Some AUDIX functions do not require passwords.
■ If a password is required, then the one you enter here must
match that password exactly.
■ If a password is not required, you can delete any existing
password as follows:
1. Open the Set Up Enhanced-List System Data window.
2. Enter some characters into the IMAPI Password: field.
3. Press until all the characters you entered have
been deleted.
4. Press (F3) to save your changes.
Administrative Trusted-Server
Name:
Valid Input:
1- to 10-alphanumeric
characters
Enter the Administrative trusted server name that you
administered in AUDIX.
This name should be listed on the Installation Information
worksheet. This field is case-sensitive, so capital letters must be
typed as capitals, and lowercase letters as lowercase.
This name cannot start with a number and cannot contain any
embedded spaces, for example, denver 1 is not allowed, but
denver_1 is allowed.
NOTE:
The ELA trusted server must be added in AUDIX before
you can complete this procedure
.
Continued on next page
Backspace
SAVE