Lucent Technologies INTUITY Messaging Solutions Enhanced-List Application 585-310-575 User Manual
Page 35
Administering TCP/IP
Issue 1 July 1997
25
5. Enter the default gateway IP address in the
Default Gateway IP
Address:
field.
The default gateway IP address is the address of the gateway router that
serves to connect to addresses on other LANs. This field is left blank if the
Lucent I
NTUITY
system will only be communicating with other machines on
the same LAN.
If your system is not connected to a LAN, enter the number you made up
for step 3.
6. Press (F8)
and then (F2)
. The system displays the
Ethernet Board Configuration window (Figure 3-7).
Figure 3-7.
Ethernet Board Configuration Window; Administering TCP/IP for
Enhanced-List Application (ELA)
7. Press (F2)
to display a list of the network interface types.
8. Highlight the network interface type to be used on this system and press
. Your PC/LAN system administrator should have this information.
9. Press (F3)
to save the Ethernet Board configuration.
10. Press (F6)
twice.
11. Press (F3)
to save the TCP/IP administration values.
12. Press (F6)
repeatedly to return to the main menu.
13. Continue with the next procedure.
CHG-KEYS
BRD CNFG
denver1
CHOICES
RETURN
SAVE
CANCEL
SAVE
CANCEL