Lincoln Electric POWER FEED SVM185-A - Manual (Page 22)

OPERATION B-4 B-4
POWER FEED® 25M
Retur
n
to
Section
T
OC
Retur
n
to
Section
T
OC
Retur
n
to
Section
T
OC
Retur
n
to
Section
T
OC
Retur
n
to
Master
T
OC
Retur
n
to
Master
T
OC
Retur
n
to
Master
T
OC
Retur
n
to
Master
T
OC
RECOMMENDED PROCESSES
• GMAW (CV, Synergic CV, Pulse, STT™, Power,
Pulse on Pulse™, Push-Pull)
• FCAW
• SMAW
• GTAW (Lift Start only)
• Solid wires .025" to 1/16"
• Cored wires .035" to 5/64"
• Cored wires .035" to 3/32" when configured for "extra
torque"
EQUIPMENT LIMITATIONS
• Works only on ArcLink® or LincNet™ Power Wave®
power sources.
• When operating on LincNet™ power sources, not all
features are available.
• Maximum gun length is 25ft.(7.6m) for push-only sys-
tems.
• Maximum gun length is 50ft.(15.2m) for push-pull
systems.
• Spool guns do not work with the POWER FEED®
25M.
• A remote control/foot amptrol and a push-pull gun
may not be connected to the POWER FEED® 25M
simultaneously.
• Maximum spool size is 12 in. (305 mm) diameter
• Maximum spool weight is 44 lb (20 kg).
• Maximum control cable length is 200 ft (61 m).
• Other gun bushings are required for welding guns
that do not have a Magnum® (Tweco #2-#4 compati-
ble) back end.
• No more than 2 wire feeders may be connected to
one ArcLink® power source at a time.
RECOMMENDED POWER SOURCES
• Power Wave® 355M
• Power Wave® 455M
• Power Wave® 455M/STT
• Power Wave® 655/R