Lincoln Electric POWER FEED SVM185-A - Manual (Page 93)

Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician
or machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 1-888-935-3877.
TEST DESCRIPTION
This test will aid the technician in the removal and replacement of the wire feed drive motor.
MATERIALS NEEDED
3/8 in. nut driver
Slot head screwdriver
Phillips head screwdriver
7/16 in. socket wrench with extension
Needlenose pliers
5/16 in. wrench
3/16 in. Allen wrench
GEAR BOX AND DRIVE MOTOR
REMOVAL AND REPLACEMENT PROCEDURE
TROUBLESHOOTING AND REPAIR F-19 F-19
POWER FEED® 25M
Retur
n
to
Section
T
OC
Retur
n
to
Section
T
OC
Retur
n
to
Section
T
OC
Retur
n
to
Section
T
OC
Retur
n
to
Master
T
OC
Retur
n
to
Master
T
OC
Retur
n
to
Master
T
OC
Retur
n
to
Master
T
OC
WARNING