Lincoln Electric POWER FEED SVM185-A - Manual (Page 96)

Retur
n
to
Section
T
OC
Retur
n
to
Section
T
OC
Retur
n
to
Section
T
OC
Retur
n
to
Section
T
OC
Retur
n
to
Master
T
OC
Retur
n
to
Master
T
OC
Retur
n
to
Master
T
OC
Retur
n
to
Master
T
OC
NOTES F-22 F-22
POWER FEED® 25M
RETEST AFTER REPAIR
Retest a machine:
• If it is rejected under test for any reason that requires you to remove any part which
could affect the machine’s electrical characteristics.
OR
• If you repair or replace any electrical components.
SET UP
1. Once the repairs have been completed, the feeder must be connected to a Powerwave®
455M power source, or simular ArcLink® power source.
2. Go to the Service Navigator under Diagnostic Utility and perform the status check proce-
dure.
3. With the use of a load bank and the utility, all functions of the feeder can be tested.