Lexmark 2480 - Manual (Page 123)

119
Tr
oubleshooting
Power Off Check the power cord and power source. If the
power light remains Off, contact your service
representative.
Power
Ready
Paper Out
Panel Lock On
Off
Blinking
Blinking The paper select lever has been changed while paper
was loaded. Move the paper select lever back to
correct position and press Start/Stop.
Note: Make sure paper is parked or unloaded
before changing the position of the paper select
lever.
Power
Ready
Paper Out
Panel Lock On
Blinking
Blinking
Blinking 1 Open and close the operator panel.
2 If you are attempting to perform a button
power On sequence, verify you are holding
the correct button.
3 Power printer Off and back On with no
buttons held down.
4 If error continues, call for service.
Power
Ready
Paper Out
Tractor 2 On
Blinking
Blinking
Blinking Insure Tractor 2 option is install correctly. For
instructions, see the Tractor 2 manual that came with
your option.
Printer status (continued)
Operator panel
lights/status
Action required