Lexmark 2480 - Manual (Page 127)

123
Tr
oubleshooting
Adjusting bidirectional alignment
Occasionally, you may want to adjust the character
alignment (also called bidirectional alignment) on your
printer. The following steps illustrate how to adjust the
alignment of the print wires.
Note: Make sure continuous forms are loaded in
your printer.
1 Make sure the default macro is set to disabled.
For help, see “Entering Setup mode” on
page 90.
2 Turn the printer Off.
3 Open the Operator panel cover to access
layer 2.
4 Press and hold Pitch while turning On the
printer.