Lexmark 2480 - Manual (Page 30)

26
Operator panel
Micro
↓
Feed the paper downward in:
• 1/72-inch increments (2480/2481
models)
• 1/90-inch increments (2490/2491
models)
If you press and hold the Micro ↓
button, the paper advances in micro
movements and then goes into
continuous feed.
Use Micro
↓
to adjust the
Top-Of-Form.
Setup Enter Setup mode to change the
default values and modes for printer
operation.
Pitch
Notes:
• Repeatedly pressing
the Pitch button
rotates through the
printer pitch
selections. If you
continue pressing
Pitch through a
second pass the pitch
selections are locked.
• This setting will be
lost when the printer
is powered Off and
back On.
Set the character pitch to: 10, 12, 15,
17, 20 cpi, or Proportional Spacing.
Notes:
• On 2490/2491 models you can also
select 24 cpi.
• Fast Draft supports only 10, 12, and
15 pitch.
Note: Some functions may not work when data is being pro-
cessed and the printer is online (Ready light is On).
Layer 2 operator panel buttons (continued)
Press this button: When you want to…