Selecting or locking a font, Operator panel selecting or locking a font – Lexmark 2480 User Manual
Page 35
31
Operator panel
Selecting or locking a font
1
To select a font, repeatedly press Font until you
see the font light On next to the selection you
want.
2
To lock any font so your software application
cannot select a different one, continue pressing
Font until the Font Lock light comes On, and
the font you want is selected.
The font is locked until the printer is turned
Off.
3
To disable Font Lock, repeatedly press Font
until the Font Lock light turns Off and the font
you want is selected.
If the printer is offline, press Start/Stop. When
the ready light comes On, you are ready to
print.
4
To set a Font or to set Font Lock as a default
setting in the Setup menu, see “Using Setup
mode to change printer settings” on page 89.
FastDraft
Draft
Gothic
Courier
Power
Ready Tractor2 Paper
out
Start/Stop
LineFeed
FormFeed
Tear Off
Load/Unload
Tractor
Font
Lock
Layer 1