Lexmark 2480 - Manual (Page 143)

139
Tr
oubleshooting
The printer does not feed
from the Tractor 2
Feeder. You are trying to print
continuous forms and
the paper select lever is
in the cut sheet
position.
Move the paper select lever
down to the continuous forms
position.
A tractor feeder with no
paper loaded is selected. Press Tractor to select the
other tractor feeder or load
paper on the selected tractor
feeder.
Tractor 2 Feeder is not
plugged in. Plug Tractor 2 Feeder into the
back of the printer.
Paper jam in the
Tractor 2 Feeder. The continuous form on
one tractor feeder was
not properly parked
before switching to the
other tractor feeder. Make sure you tear off the
leading edge of the
continuous form on the
currently selected tractor
feeder before switching
tractor feeders. For help, refer
to the documentation
shipped with your option.
The Tractor 2 Feeder
places paper at the
wrong Top-Of-Form
position. Top-Of-Form is set
incorrectly. See“Setting Top-Of-Form” on
page 81.
Printer problems (continued)
Problem Probable cause Action