Lexmark 2480 - Manual (Page 90)

86
Loading paper
6 Press Set TOF to set and save your
Top-Of-Form.
7 Close the operator panel cover.
8 Press Start/Stop to put the printer online.
Setting Top-Of-Form in a macro
Each macro has a separate Top-Of-Form setting. To set
Top-Of-Form in a macro, you must first select that
macro:
1 Open the operator panel cover to access layer 2.
2 Press Macro to select the macro you want to
use to set a Top-Of-Form.
Now set the Top-Of-Form. The procedure for setting
Top-Of-Form depends on the paper and print mode you
are using. For help, see one of the following:
• “Setting Top-Of-Form for continuous form
paper in push mode” on pag e81.
• “Setting Top-Of-Form for continuous form
paper in pull mode” on page 84.
• “Setting Top-Of-Form for a cut form or
envelope” on pag e85.