Lexmark 2480 - Manual (Page 87)

83
Loading paper
This illustration shows the position of the two
horizontal lines on either side of the metal platen bar.
Use these lines as your reference point when lining up
your Top-Of-Form. The bottom of a printed character
will be even with the horizontal lines.
8 Press Set TOF to set and save your Top-Of-
Form.
9 Close the operator panel cover.
10 To verify the new Top-Of-Form, press
Load/Unload to unload the continuous forms
and press Load/Unload again to reload the
forms.
The continuous forms load to the current
Top-Of-Form setting.
11 Press Start/Stop to set the printer online.
Note: If Auto Tear Off is set to On or One
Second the paper advances to the Tear
Off position. A print job or pressing Tear
Off returns the paper to the current
Top-Of-Form.
Align paper with
horizontal lines on
metal platen bar
Ribbon
cartridge Front
cover
Horizontal
line
Paper
Metal
platen