Lexmark 2480 User Manual
Page 88
84
Loading paper
Setting Top-Of-Form for continuous
form paper in pull mode
1
Turn the printer On.
The Paper Out light blinks if no paper is loaded.
2
Move the paper select lever down to the
continuous forms
position.
3
Load continuous form paper on the pull tractor
feed pins.
For help loading paper, see “Front loading
continuous forms using the pull tractor” on
page 56.
4
Open the operator panel cover to access layer 2.
5
Press any paper movement button (LineFeed,
Micro
↑
, or Micro
↓
) to move the paper to the
Top Of Form position.
Note: Use the second sheet of the continuous
forms to set Top-Of-Form.
6
Press Set TOF to set and save Top-Of-Form.
7
Close the operator panel cover.
Note: Top-Of-Form is not saved if the printer is
turned Off or runs out of paper when the
printer is in pull tractor mode.
8
Press Start/Stop to set the printer online.