Lincoln Electric WELDANPOWER SVM 113-A User Manual
Weldanpower 125, Svm 113-a, Service manual
Advertising
SVM 113-A
January, 1996
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However,
your overall safety can be
increased by proper installation .
. . and thoughtful operation on
your part. DO NOT INSTALL,
OPERATE OR REPAIR THIS
EQUIPMENT WITHOUT READ-
ING THIS MANUAL AND THE
SAFETY PRECAUTIONS CON-
TAINED THROUGHOUT. And,
most importantly, think before
you act and be careful.
SERVICE MANUAL
World’s Leader in Welding and Cutting Products Premier Manufacturer of Industrial Motors
Sales and Service through subsidiaries and Distributors Worldwide
22801 St. Clair Ave. Cleveland, Ohio 44117-1199 U.S.A. Tel. (216) 481-8100
For use with machine code numbers 10158 and 10160
WELDANPOWER 125
TM
RETURN TO MAIN INDEX
Advertising
Table of contents
Document Outline
- Master TOC
- Safety
- Section A Installation
- Section B Operation
- Section C Accessories
- Section D Maintenance
- Section E Theory of Operation
- Section F Troubleshooting & Repair
- Symptoms
- Major physical or electrical damage is evident.
- No weld output and no auxiliary power. Engine operates normally.
- No weld output, the auxiliary power (230-115VAC) operates normally. Engine runs normally.
- No auxiliary power – welding output is normal – engine runs normally.
- Low weld output and low auxiliary output.
- Engine will not start.
- Engine runs erratic or stops running.
- Engine will NOT idle down to low speed.
- Engine idles down to low idle but will not stay at low idle.
- Engine will not go to high idle when attempting to weld or when the auxiliary power is loaded. Welding output and auxiliary......
- Engine will not go to high idle when attempting to weld. Welding output is normal when the idler control switch is in "HIGH".....
- Engine will not go to high idle when using the auxiliary power. Auxiliary power output is normal when the idler control switch...
- The welding arc is “cold.” The engine runs normally. The auxiliary power functions normally.
- Section G Electrical Diagrams