Main stator, Winding test, The main stator winding test – Lincoln Electric WELDANPOWER SVM 113-A User Manual
Page 58: Troubleshooting & repair, Main stator test, Warning
TROUBLESHOOTING & REPAIR
F-20
F-20
WELDANPOWER 125
MAIN STATOR TEST
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 216-383-2531 or 1-800-833-9353 (WELD).
TEST DESCRIPTION
This test will determine if the main stator is generating the proper AC output voltages.
MATERIALS NEEDED
Volt/Ohmmeter
5/16" Nut driver
5/16" Open end or box wrench
Wiring Diagram
WARNING