Troubleshooting & repair, Typical weld output waveform – Lincoln Electric WELDANPOWER SVM 113-A User Manual
Page 71
Advertising
TROUBLESHOOTING & REPAIR
F-33
F-33
WELDANPOWER 125
CH1
0 volts
5 ms
20 volts
This is the typical DC output voltage
generated from a properly operating
machine. Note that each vertical
division represents 20 volts and that
each horizontal division represents 5
milliseconds in time. The mahine
was loaded with a resistance grid
bank.
Note: Scope probes connected at
machine output terminals.
SCOPE SETTINGS
Volts/Div.....................20V/Div.
Horizontal Sweep.....5 ms/Div.
Coupling ............................DC
Trigger .........................Internal
MACHINE LOADED TO 125 AMPS AT 25 VAC
TYPICAL WELD OUTPUT WAVEFORM
MACHINE LOADED
Advertising