Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 102)

SETUP
Lexicon
3-60
EDIT CUSTOM NAME
Opens the EDIT CUSTOM NAME drop-down menu shown above,
which can be used to create a custom unit name. The factory-
default unit name is MC-12.
To create a custom unit name:
1. Follow the EDIT CUSTOM NAME menu path shown above to
open the EDIT CUSTOM NAME drop-down menu.
2. When the EDIT CUSTOM NAME drop-down menu opens,
locate the current unit name on the second line of the drop-
down menu. The cursor automatically appears beneath the
first character in the current unit name.
3. When the current unit name is located, use the following
remote control commands to enter the desired unit name:
• Press the and arrow buttons to change the character
above the cursor.
• Press the arrow button to advance to the next character
space. The cursor will automatically wrap to the first
character space when the last (twentieth) character space
is passed.
EDIT CUSTOM NAME DISPLAYS SETUP
• Press the arrow button to return to the previous
character space. When the cursor is positioned in the first
character space, pressing the
arrow button will close the
EDIT CUSTOM NAME drop-down menu.
4. When the desired custom unit name has been entered, press
the arrow button until the EDIT CUSTOM NAME drop-down
menu closes.
When the CUSTOM NAME parameter is set to ON, the custom unit
name scrolls across the on-screen and front panel displays
whenever the MC-12 is activated.
DISPLAY SETUP
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
A/V SYNC DELAY
OFF
CUSTOM NAME OFF
EDIT CUSTOM NAME
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
DISPLAYS
EDIT CUSTOM NAME
EDIT CUSTOM NAME
MC-12
^
W Y BUTTONS TO EDIT
UP TO 20 CHARACTERS
V BUTTON TO ADVANCE
Display Setup (continued from page 3-59)