Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 94)

MANUAL SPEAKER SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
0.0ft 0.0ft
0.0ft 0.0ft 0.0ft
0.0ft 0.0ft
0.0ft
L M
SUB
R
C
SL
SR
RL
RR
SETUP
Lexicon
3-52
Performing Manual Speaker Distance Calibration
Selecting the MANUAL SPEAKER SETUP menu SPEAKER DISTANCES option opens the SPEAKER DISTANCES menu shown below, which can be
used to manually calibrate speaker distances.
SPEAKER DISTANCES MANUAL SPEAKERS SETUP
To manually calibrate speaker distances:
1. Follow the menu path shown above to select the MANUAL
SPEAKER SETUP menu SPEAKER DISTANCES option. The
SPEAKER DISTANCES menu shown above will open on the
on-screen display.
2. Press the and arrow buttons to highlight the desired
speaker distance parameter. Then, press the arrow button to
select the highlighted speaker distance parameter.
3. To determine the appropriate speaker distance, measure the
distance between the primary listening position and the front
baffle of the speaker. For instance, if the FRONT LEFT parameter
is selected, measure the distance between the primary listening
position and the front baffle of the speaker connected to the
Main Zone audio output connector labeled Front L.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
SPEAKERS
MANUAL
SPEAKER DISTANCES
SPEAKER DISTANCES
FRONT LEFT 0.0ft
CENTER 0.0ft
FRONT RIGHT 0.0ft
SIDE RIGHT 0.0ft
REAR RIGHT 0.0ft
REAR LEFT 0.0ft
SIDE LEFT 0.0ft
MONO SUB 0.0ft
SUB RIGHT N/A
LFE N/A
UNITS FEET
METERS
FEET
0.0 to 30.0ft or 12.0m
4. When the speaker distance has been measured, press the
and arrow buttons to set the parameter to the closest
available value.