Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 79)

SETUP
MC-12
3-37
R E C O M M E N D E D
microphone positioning for the microphone check
During the microphone check, do not:
✗ separate the microphones
✗ scatter the microphones throughout the listening
space
✗ obstruct the line-of-sight path between the
microphones and the speakers
✗ position the microphones on the floor, on seat
cushions, or in locations obstructed by furniture
and other fixtures, where echoes might obscure
calibration noise signals
✗ position the microphones within 2 feet (0.61m) of
speakers and walls or more than 30 feet (9.14m)
from any one speaker
The illustration at the right provides an example of improper
microphone placement during the microphone check. The
microphones are scattered throughout the listening space rather
than positioned as close together as possible in a location that is
equidistant from the front left and right speakers. In addition,
two microphones are positioned on the floor and two
microphones are positioned on a table obstructed by furniture.
FR C FL
SL
RL RR
SR