Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 93)

SETUP
MC-12
3-51
MANUAL CALIBRATION
Selecting the SPEAKER SETUP menu MANUAL option opens the MANUAL SPEAKER SETUP menu shown below, which can be used to manually
calibrate speaker distances and output levels. The table below indicates available manual calibration options.
MANUAL SPEAKERS SETUP
Details Manual Options
SPEAKER DISTANCES
INTERNAL NOISE TEST
EXTERNAL NOISE TEST
BASS PEAK LIMITERS
• Provides manual calibration and individual adjustment of speaker distances.
• Provides manual calibration and individual adjustment of output levels.
• Automatically sends an internal calibration noise signal to each Main Zone audio output connector, allowing
for simultaneous output level adjustment.
• Provides manual calibration and individual adjustment of output levels.
• Requires an external calibration source such as an audio calibration disc.
• Activates an appropriate listening mode based on the current Main Zone input source.
• Provides amplitude limits for low-frequency signals sent to the Main Zone audio output connectors labeled
Subwoofer L/R and LFE as well as low-frequency signals redirected to other Main Zone audio output connectors.
• Protects speakers against input sources that produce low-frequency signal peaks.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
SPEAKERS
MANUAL
MANUAL SPEAKER SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
0.0dB 0.0dB
0.0dB 0.0dB 0.0dB
0.0dB 0.0dB
0.0dB
L M
SUB
R
C
SL
SR
RL
RR