Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 146)

MODE ADJUST
Lexicon
5-30
5.1a MUSIC
• Designed for playback of 5.1-channel analog music sources.
• The 5.1a MUSIC listening mode is not available unless
both side and rear speakers are present.
• Applies ASA processing to signals sent to the rear speakers.
Refer to the ASA parameter description on page 3-31 for more
information.
• Recommended for home theaters in which the rear speakers
are placed close together.
Default Possible
Parameter Setting Settings
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
Note:
The 5.1a MUSIC listening mode can only be
activated with the front panel or remote control
Mode buttons.
5.1a @** MUSIC MODE ADJUST
5.1a STANDARD
• Designed for playback of 5.1-channel analog sources.
• Converts 5.1-channel analog input signals into digital audio for
internal processing.
• Allows 5.1-channel analog sources to use bass management,
speaker crossovers, speaker distance calibration, and audio
controls (tone controls). When these features are not used, the
5.1a STANDARD listening mode is similar to the 5.1a BYPASS
listening mode.
• Sends identical signals (with appropriate time delays) to the
Main Zone audio output connectors labeled Side L and Rear L
as well as Side R and Rear R.
Parameter
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
5.1a STANDARD MODE ADJUST