Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 114)

AUDIO CONTROLS
MC-12
4-5
TILT EQ -3.0 to +3.0
Controls the amount of tilt equalization applied to the Main Zone
audio output connectors labeled Front L/R, Center, LFE, and
Subwoofer L/R. This parameter setting affects the entire frequency
spectrum with a hinge point at 1kHz. As the setting increases,
frequencies higher than 1kHz are boosted while frequencies lower
than 1kHz are simultaneously cut. As the setting decreases,
frequencies higher than 1kHz are cut while frequencies lower than
1kHz are simultaneously boosted. The graph shown at the right
indicates the frequency response of all TILT EQ parameter settings.
Note:
When the Shift command bank is activated:
• Pressing the GAME button increases the TILT EQ
parameter setting in 0.2dB increments.
• Pressing the AUX button decreases the TILT EQ
parameter setting 0.2dB increments.
• Pressing the OSD button sets the BASS, TREBLE,
and TILT EQ parameters to +0.0dB.
TILT EQ AUDIO CONTROLS
10 20 50 100 200 500 1k 2k 5k 10k 20k
Hz
+3.0
+2.8
+2.6
+2.4
+2.2
+2.0
+1.8
+1.6
+1.4
+1.2
+1.0
+0.8
+0.6
+0.4
+0.2
-0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-1.4
-1.6
-1.8
-2.0
-2.2
-2.4
-2.6
-2.8
-3.0
+3.0
+2.8
+2.6
+2.4
+2.2
+2.0
+1.8
+1.6
+1.4
+1.2
+1.0
+0.8
+0.6
+0.4
+0.2
+0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-1.4
-1.6
-1.8
-2.0
-2.2
-2.4
-2.6
-2.8
-3.0
TILT EQ
The TILT EQ parameter controls the amount of tilt equalization applied to the Main
Zone audio output connectors labeled Front L/R, Center, LFE, and Subwoofer L/R.