Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 57)

SETUP
MC-12
3-15
Parameter Possible Settings
INPUT SELECT DIGITAL, ANALOG, AUTO
ANALOG BYPASS ON, OFF
S-VIDEO 16:9 AUTO, OFF
S-VIDEO OSD 4:3 ON, OFF
COMPONENT OSD ON, OFF
INPUT SELECT DIGITAL, ANALOG, AUTO
Controls the interaction of the digital and analog audio input
connectors assigned for the selected Main Zone input. The table on
the next page describes INPUT SELECT parameter settings.
Note:
When the Shift command bank is activated, the 7/5
button can be used to adjust the INPUT SELECT
parameter, cycling through the DIGITAL, ANALOG,
and AUTO settings.
ANALOG BYPASS ON, OFF
Allows analog sources to bypass A/D conversion and internal
processing. When ON is selected, the MC-12 passes analog input
signals directly to the Main Zone audio output connectors.
• When a 2-channel analog source is present, the MC-12 passes
analog input signals directly to the Front L/R output
connectors.
ANALOG BYPASS MAIN ADVANCED DVD1 INPUTS SETUP
INPUT SELECT MAIN ADVANCED DVD1 INPUTS SETUP
• When a 5.1-channel analog source is present, the MC-12
passes analog input signals to the Main Zone audio output
connectors as indicated in the table on pages 2-7 and 3-58.
When OFF is selected, the MC-12 sends analog input signals
through A/D conversion and internal processing before passing
them to the Main Zone audio output connectors. This allows
analog sources to use bass management, speaker crossovers,
speaker distance calibration, and tone controls.
Note:
When the Shift command bank is activated, pressing
the 2CH button toggles the ANALOG BYPASS
parameter between the ON and OFF settings.
S-VIDEO 16:9 AUTO, OFF
Controls the passage of anamorphic trigger signals present in some
video sources. When AUTO is selected, the MC-12 passes
anamorphic video input signals through the S-video switcher,
enabling compatible display devices to automatically switch
between anamorphic and non-anamorphic display modes.
When OFF is selected, the MC-12 does not pass anamorphic video
input signals through the S-video switcher, preventing compatible
display devices from automatically switching between anamorphic
and non-anamorphic display modes.
. . . Configuring Advanced Input Settings continues on page 3-16
S-VIDEO 16:9 MAIN ADVANCED DVD1 INPUTS SETUP