Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 99)

SETUP
MC-12
3-57
CAL NOISE ON, OFF
Determines whether bass peak limiters are set with an internal or
external calibration source. When ON is selected, the MC-12
activates an internal calibration noise signal to set bass peak
limiters. When OFF is selected, the MC-12 deactivates the internal
calibration noise signal. Setting bass peak limiters requires an
external calibration source such as an audio calibration disc.
L/R LIMITER ON, OFF
Limits low-frequency signals sent to the subwoofer or redirected to
other speakers. When ON is selected, the MC-12 restricts the
output level of these signals according to the L/R LIMIT ADJ
parameter setting. When OFF is selected, the MC-12 does not
restrict the output level of these signals, regardless of the L/R LIMIT
ADJ parameter setting.
L/R LIMIT ADJ 75 to 120dB
Specifies the output level restriction the MC-12 applies to the
Subwoofer L/R output connectors as well as to other Main Zone audio
output connectors to which low-frequency signals are redirected.
When the L/R LIMIT ADJ parameter is selected, it is automatically
set to 75dB. The MC-12 applies the selected output level restriction
when the L/R LIMITER parameter is set to ON.
L/R LIMIT ADJ
BASS PEAK LIMITERS LEVELS CALIBRATION MANUAL SPEAKERS SETUP
L/R LIMITER
BASS PEAK LIMITERS LEVELS CALIBRATION MANUAL SPEAKERS SETUP
CAL NOISE
BASS PEAK LIMITERS LEVELS CALIBRATION MANUAL SPEAKERS SETUP
LFE LIMITER ON, OFF
Limits low-frequency signals sent to the LFE subwoofer or redirected
to other speakers. When ON is selected, the MC-12 restricts the
output level of these signals according to the LFE LIMIT ADJ
parameter setting. When OFF is selected, the MC-12 does not
restrict the output level of these signals, regardless of the LFE LIMIT
ADJ parameter setting.
LFE LIMIT ADJ 75 to 120dB
Specifies the output level restriction the MC-12 applies to the
LFE output connector as well as to other Main Zone audio output
connectors to which low-frequency signals are redirected. When
the LFE LIMIT ADJ parameter is selected, it is automatically set to
75dB. The MC-12 applies the selected output level restriction when
the LFE LIMITER parameter is set to ON.
LFE LIMIT ADJ
BASS PEAK LIMITERS LEVELS CALIBRATION MANUAL SPEAKERS SETUP
LFE LIMITER
BASS PEAK LIMITERS LEVELS CALIBRATION MANUAL SPEAKERS SETUP