Lexicon MC-12 Digital Controller Lexicon MC-12 - Manual (Page 72)

SETUP
Lexicon
3-30
LFE ON, OFF
Activates and deactivates the Main Zone audio output connector
labeled LFE.
When a custom speaker setup is selected:
• Select ON to activate the LFE output connector, configuring
the Main Zone audio output connectors for a 7.1-channel
speaker setup. The MC-12 sends LFE information to the LFE
output connector.
LFE CUSTOM SETUP SET CROSSOVERS SPEAKERS SETUP
• Select OFF to deactivate the LFE output connector, configuring
the Main Zone audio output connectors for a 5.1-channel
speaker setup. The MC-12 redirects LFE information to the
Subwoofer L/R output connectors. If the SUB L/R parameter is
set to OFF, the MC-12 redirects LFE information to the speakers
with the lowest crossover point.
When a THX speaker setup is selected, the LFE parameter cannot
be adjusted. The MC-12 automatically deactivates the LFE output
connector and redirects LFE information to the Subwoofer L/R
output connectors.
THX SETUP SET CROSSOVERS SPEAKERS SETUP
Setting Crossover Points (continued from page 3-29)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
SPEAKERS
SET CROSSOVERS
CROSSOVER SETUP
CUSTOM SETUP
THX SETUP
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUB L/R MONO
SUB XOVER 40Hz
LFE OFF
ULTRA2 SUB OFF
BGC N/A
ASA APART
THX SPEAKER SETUP
!CAUTION!
PRESSING THE V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A THX
SPEAKER
CONFIGURATION
THX SETUP
FRONT L/R THX 80Hz
CENTER THX 80Hz
SIDE L/R THX 80Hz
REAR L/R THX 80Hz
SUB L/R MONO
SUB XOVER THX 80Hz
LFE OFF
ULTRA2 SUB OFF
BGC N/A
ASA APART
!CAUTION!
ON
OFF
APART
CLOSE
TOGETHER