Removed see, Filter capacitor, Removal and replacement – Lincoln Electric INVERTEC V250-S User Manual
Page 81: Troubleshooting & repair, Materials needed, Filter capacitor removal and replacement, Warning
F-49
TROUBLESHOOTING & REPAIR
F-49
INVERTEC V250-S
MATERIALS NEEDED
5/16” nut-driver
Slot head screwdriver
FILTER CAPACITOR REMOVAL AND REPLACEMENT
Service and repair should be performed only by Lincoln Electric factory trained per-
sonnel. Unauthorized repairs performed on this equipment could result in danger to
the technician or the machine operator and will invalidate your factory warranty. For
your safety and to avoid electrical shock, please observe all safety notes and precau-
tions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform
the tests/repairs safely, contact the Lincoln Electric service department for technical
troubleshooting assistance before you proceed.
Call (216) 383-2531 or (800) 833-9353 (WELD).
_____________________________________________________________
WARNING
MATCHED PARTS
The following machine parts must be replaced in matched sets If Capacitor C1 is found to be
defective, both Capacitors C1 and C2 must be replaced at the same time: