Lucent Technologies GW-DS300N - Manual (Page 35)

2
30
GW-DS300N
WPA-Preshared Key This setting only takes effect under“WPA-PSK”
or“WPA2-PSK” mode. Besides, the key should be
at least 8 characters and 63 characters at maximum.
This Passphrase (also called a shared secret) that
must be entered in both the wireless access point and
the WPA clients (computers). The WPA pre-shared
key should be a random sequence of either keyboard
characters (upper and lowercase letters, numbers, and
punctuation). You have to enter the same Passphrase
or Hexadecimal key into both your access points and
computers but the length requirement is changed.
The more random your WPA pre-shared key, the
safer it is to use.
WEP Key
Key#1~#4 This setting only takes effect under“Open”or
“Shared”mode. There are four types of WEP key
settings, please set the key depending on the real
environment. According to the type and length, there
are four WEP Key types:
Hexadecimal–Only“A~F,”“a~f,”and“0~9”are
allowed to be set in a WEP key.
ASCII–Numerical values, characters or signs are all
allowed to be arranged into a WEP key. It is more
recognizable for user.
64-bit–Enter 10-digit Hex values or 5-digit ASCII
values as the encryption keys. For example:“
0123456aef”or“Guest.”
128-bit–Enter 26-digit Hex values or 13-digit ASCII
values as the encryption keys. For example:“012345
67890123456789abcdef”or“administrator.”