Lucent Technologies GW-DS300N - Manual (Page 61)

57
4
Chapter 4 Soft AP Mode
Wireless Mode S c r o l l d o w n t h e l i s t t o c h o o s e t h e w i r e l e s s
m o d e f o r t h e A P. T h e r e a r e f o u r k i n d s
of modes : “802.11 B/G Mixed”, “802.11 B only”,
“802.11 G only” and “802.11 B/G/N mix”. The
system default is “802.11 B/G/N mix”. Please set the
mode according to the real environment.
Country Region Code You can change the detected channel if you want.
There are 8 kinds of Country Region Codes to
choose from.
0 ĈFCC(Canada) CH1~11
1 ĈETSI CH1~13
2 ĈSPAIN CH10~11
3 ĈFRANCE CH10~13
4 ĈMKK CH14~14
5 ĈMKKI(TELEC) CH1~14
6 ĈISRAEL CH3~9
7 ĈISRAEL CH5~13
Wireless Protection 802.11b uses CCK (Complementary Code Keying),
however 802.11g/n uses OFDM (Orthogonal
F r e q u e n c y D i v i s i o n M u l t i p l e x i n g ) a n d a l s o
compatible with CCK. So, when there are both
802.11b and 802.11g/n stations in the range of an
AP, to avoid collisions of data transmitted between
stations, it is necessary to set B/G Protection.
The settings only take effects when using “802.11
B/G Mixed” and “802.11B/G/N mix”, and the
settings are:
œAuto: STA will dynamically change as AP
announcement.
œOn: Always send frame with protection.