Lucent Technologies GW-DS300N - Manual (Page 59)

55
4
Chapter 4 Soft AP Mode
4
Soft AP Mode
GW-DS300N also has Soft AP function. The functions included in AP
mode are Channel, SSID, MAC access control, WEP encryption, and so
on.
4.1 How to use AP mode
If you want to use the Soft AP function of GW-DS300N, please follow the
steps below to install the driver and the utility of GW-DS300N.
1.After finishing installation and restart the computer, the task bar on the
desktop will show as follows. Right click the mouse on the PLANEX
icon, and the four options will show: Launch Config Utilities, Use
Zero Configuration as Configuration utility, Switch to AP Mode, and
Exit. Click “Switch to AP Mode”, the utility will switch GW-DS300N
to the AP mode immediately.