Lucent Technologies GW-DS300N - Manual (Page 66)

4
62
GW-DS300N
computers but the length requirement is changed.
The more random your WPA pre-shared key, the
safer it is to use.
Group Rekey Interval T h i s f u n c t i o n o n l y t a k e s e ff e c t w h e n u s i n g
“WPA-PSK”, “WPA2-PSK”and“WPA-PSK/
WPA2-PSK” authentication. The key set by the user
will be changed according to the interval set by the
user. The system default value is 0.
WEP Key
Key#1~#4 This setting only takes effect after selecting“WEP”
encryption. There are four types of WEP key
settings, please set the key depending on the real
environment. According to the type and length, there
are four WEP Key types:
Hexadecimal – Only“A~F,”“a~f,”and“0~9”are
allowed to be set in a WEP key.
ASCII –Numerical values, characters or signs are
all allowed to be arranged into a WEP key. It is more
recognizable for user.
64-bit – Enter 10-digit Hex values or 5-digit ASCII
values as the encryption keys. For example:“
0123456aef”or“Guest.”
128-bit – Enter 26-digit Hex values or 13-digit
ASCII values as the encryption keys. For example:“
01234567890123456789abcdef”or“administrator.”
Show Password If you want to let the system shows the password
you set, you can enable this check box. After that,
the asterisk(*) will be replaced by the showing the
password.