Lucent Technologies GW-DS300N - Manual (Page 37)

2
32
GW-DS300N
2.6 802.1x Setting
Click“Authentication and Security”tab on the page of“Add Profile”and
then click“802.1x Setting”, and the following picture will pop up. Please
refer to the following instructions to configure GW-DS300N. The 802.1x
authentication is mainly focus on“WPA”and“WPA2”encryption.
Items Descriptions
Certification
Authentication Type 1.PEAP–Pronounced“peep”and short for Protected
Extensible Authentication Protocol, a protocol
developed jointly by Microsoft, RSA Security
and Cisco for transmitting authentication data,
including passwords, over 802.11 wireless
networks. And it requires a set of user name and
password in addition. Enter the“User Name”and
“Password”and also select a certificate from the
“Certificate”list. To get the certificate and the
personal user name and password, please contact
with your administrator.
2.TLS ƟSmart Card–Short for Transport Layer
Security, a protocol that guarantees privacy and
data integrity between client/server applications
communicating over the Internet.
3.TTLS–Short for Tunneled Transport Layer
Security, and is an advanced TLS protocol.
4.Md5-Challenge–It is the easiest EAP Type. It
requires the wireless station to enter a set of user
name and password as the identity to RADIUS
Server. (Only“Open”and“Shared”encryption
mode can use this function.)