Lucent Technologies GW-DS300N - Manual (Page 51)

3
46
GW-DS300N
MAC Address Enter the remote system which you want to connect
with. When you want to enable this function, you
have to make sure that your wireless network
supports WMM function and then enter the MAC
address of the adapter which wants to connect with
the remote system.
Timeout Value The utility performs time-outs so that the program does
not sit idle waiting for input that may never come.
Set a value to apply to the system with WMM.
DLS Status The system will show you the remote devices which
has already connected and supported WMM.
OK Click“OK”button and the utility will save the
settings and close the page.